I have a 30# stack 5 t0 7 years old the bottom dryer does not seem to be getting clothes dry. I flip on the digital read out and it fluctuates 183 to 178 degrees . the filters are clean the exhaust is clear and when looking at flame it is blue and runs for app 17 sec, tried different loads ie towells, shirts & pants , and a load jeans , they just do not get as dry as fast as the dryer on top for same load? where should I be looking next?
Does the ignition control box lock out (red led on the ignitor control flashes)? If so check the voltage, it can affect it. Don't ask me how but it does. the dryer will run normally except for the flame, it shows it self as an intermitent problem. They have the ability to be installed for different voltages. All that changes is a wire on the transformer.