One of my SQ SCN040's is giving me an error message of "E FL" which means that the fill level is not met within 10 minutes of fill step. So I've determined that this is because someone filled the machine with synthetic pillows that absorbed all the water.
Question is how do I get rid of the message and get the machine back up and running?
Any help would be greatly appreciated. Also, any thoughts on how to get my hands on a service manual for my machine?
I doubt that the pillows would cause that error. If the switch is not satified due to a lack of water, it will just call for more till it is. Have you checked the pressure hose to make sure it is not clogged up?
Its the hose that runs from the drain box to the pressure switch. It has a 90 degree boot where it meets the drain. Remove it and scrape out the goo. I usually pull the hose off completley and rinse it with pressure from a sink fawcet.
Also check the drain valve for a bra wire or something that may be preventing the valve from closing.
Hope this helps,
Last edited by zclean1; 04-12-2010 at 01:08 PM.
Reason: more info